What's Crafting?

What's Crafting?
Click here for this weeks updates...

Search This Blog

Friday, April 26, 2013

Making the Perfect Pet Bed...

As I finished up a few gift packages for friends and family this week I thought it would be fun to post a quick DIY craft for those of you looking for something fun to work on over the weekend. If you happened to have stopped by my blog dedicated to my beautiful Shih Tzu then you know how much happiness pets bring to us. So this blog post is dedicated to my fuzzy little loves and making a happy nap zone for all of our cute little babies. 

I have made so many pet beds at this point that I can lead you through the process in no time so that whether you are looking for one that is big or small, zippered, stuffed, square, round, you name it, you will find some helpful advice on how to make your own within a reasonable budget. And who doesn’t love that? Having a comfy zone for your little angel/s to rest also helps in that the quiet time leaves you some extra time to craft ;)

Now I realize that the title is a broad one in the sense that the style of the pet bed you want can be quite different that the next person visiting this page but I will break it down a bit to keep it simple. Here are the general styles for pet beds. Most of what you find on the market falls into one of these three categories.

Style 1-Outer shell stuffed in batting or poly fill with side walls and then a separate bed insert added. This style can have a zippered outer cover for the bed pillow or not. This style can be either square or round.

Style 2-Big flat pillow style. This type of bed can be small and stuffed with a poly fill, a lightly padded pillow insert, or for the larger beds I recommend a bed or comforter insert and I will explain what I mean by that below. This style can also be either square or round, though for the larger beds you may find square or even rectangular to be easiest.

Style 3-This is the bed style that is a bit more stylized in that a pattern such as this one will be more like a deluxe style. NuFoam is a foam insert and you can usually find it at Joann’s. It is recommended for the insert and the supplies for this style may be higher than my claim for a well priced pet bed, but if you go craft hunting on a budget and visualize getting fabulous deals then you should find the supplies for this type of bed just may fall under the $30-$40 mark.

Over the years we have purchased many pet beds from various sources for our boys and many of these are still in use today. I think our dogs have a bed in just about every room of the house practically but this last holiday I really wanted to give a friend with a HUGE dog a really nice, big, fluffy, 100% washable dog bed. So I started out by hitting up a few shops such as tj maxx, home goods, pet stores and the really good ones (you know the kind where they’re soft and have a really nice insert with a removable zippered cover) were upwards of $100! And as I am sure they are lovely and worth that much, my crafty self cannot do it. Or better yet, I won’t do it.

So I set about putting together a pet bed on my own. I had a few things I was going to insist on though. First, it had to be comfy and warm. I don’t like cheap fabric and I like for the outer shell of the pillow to be removable with a zipper. In my opinion pet beds need to either have a washable shell or be small enough to be tossed in the wash as is. I happened to have a long zipper in stock but you can expect to pay about $4 for a long zipper, perhaps a little more. When it comes to last minute holiday gifts, I am just as willing as anyone else to keep it simple and if picking up a big pet blanket at a store for $10 means most of the outer pet bed shell is already sewn (seeing as I was thinking I would just open an end and add a zipper and then add the insert inside) and the blanket was going to cost less than the fabric I picked out at the store, then I was definitely going to go with the pet blanket idea. 

I ended up picking up the softest dog blanket at a home goods store. $10. As I was about to head for the checkout I happened to stop over at the bedding section and there was the most fabulous full sized down mattress cover for $15. It was perfect. It was going to fit inside the blanket well. The full sized Nautica mattress pad was about 4” thick, a really nice quality piece, and with some fabric in the shop I covered the mattress cover in a basic fabric. I opened an end of the blanket and turned it inside out and added the zipper, flipped it right side out again and slipped the insert inside. Finished! Months later it was happily reported that the dog still loves it.

Here is a photo of Gizmo R. napping on a bed I made him. This one has been in use for some time but is still a favorite. With this one I went with style 2 in the square shape and double sided so you can flip both the outside shell and the bottom pillow from that fuzzy grey fabric to a cool cotton in the warmer months. 

If you have the fabric or would rather not use a pre-made blanket for the outer shell of your pet bed then you are going to want a top sheet of fabric and a bottom sheet that is slightly larger in length and width than the bed insert you intend to use. If you are planning on stuffing your own bed insert then you are also going to want a top and bottom fabric sheet to cover the bed insert inside as well. In the project above I covered the bed mattress insert in a basic fabric before I slipped it inside the outside casing. Durability and safety for the pets is what I think of most when making a pet bed for a fuzzy one because pets are amazing at destroying things they love, and hate, and anything in between that pleases them. Am I right? I know I am. 

Mine have the sharpest little teeth and can tear holes through fabric even when everything is sewn a few times so when you go to sew these up definitely plan on sewing them multiple times. You should sew each seam at least three times to be safe and if you have pets that tear up everything in sight then covering all areas with a thick duck cotton type fabric will be a decent fabric in which to use. A canvas also works as it too has a tight, durable weave. That is why a lot of pet toy companies make their items with a duck fabric because it can withstand constant dog chewing for a decent amount of time. People always want soft fabric toys, my boys included, however those fabrics with the softer materials usually have a looser weave or possibly the difference of a knit as opposed to a weave and dogs can tear holes into everything …(looks at Obi-Wan)..well, sooner than you would think.

The difference between style 2 described above and style 1 is the difference of a base for the pet bed which then holds the top pillow in place. I just made a few recently so here are some photos for you. One is for my mom’s big cat and then two others are for the boy’s sister’s. For these I laid out a long rectangular piece that is long enough in width to be wrapped into a circle, stuffed and then sewn down to an oval base panel for the bottom. For the length you want to keep in mind that you will be folding this piece over to form the walls of the pet bed and it will be stuffed so in the end go with a slightly longer piece and you can trim it down if needed. Sewing pet beds can be tough on a sewing machine so I recommend sewing together raw edges as opposed to turning seams inward and then sewing a seam as the fabric may be too thick at the seams to get through on a regular sewing machine. 

Fold over the piece that is going to be your outer shell and fold it over and sew the ends together, then turn right side out and sew around the bottom all the way except about 3-4” in order to insert the stuffing. Stuff it as desired and then sew up the small opening. Place the stuffed outer shell over the bottom oval pattern and pin and sew the base to the walls all the way around, trim and turn right side out. Your bottom shell is finished. Next just make the pillow insert by taking a top and bottom piece of fabric and placing the pieces right side in and sew all the way around leaving a few inches in which to turn the pillow casing right side out, stuff, sew up the seam opening and then place it in the inside pet shell and you have yourself a pet bed! If you want a square pet bed then instead of one big piece for the outer shell side piece that you fold over, sew and stuff you are instead going to go with either 4 pieces that you will sew together at the seams, stuff and then sew together at the bottom seams or if you are having the inside of the pet bed and the outside different fabrics, you will go with 8 pieces, sew the inside and outside panels together, then follow through with the rest of the sewing as described above.

The third style is really nice as well and I do not have pictures yet of this style I will have some to come but you will see how with the pattern, materials and some extra crafting time at your disposal you can make yourself a fun bed for your pets. Essentially this style is the creation of the side panels made from a quilted type material that is a bit heavier and will hold up those walls structurally. 

The photos above are of my Pegasus Pet Beds. 
Once I made the outer shell I made a padded insert for the base, 2 stuffed wings and a tail. 

Each piece has a foam insert and when you sew the inside and outer casing together and add the foam pieces you have a comfy den for your pet. When making this last pet bed I am planning on altering the pattern slightly so I can easily remove the nufoam inserts via zippered areas and wash the outer shells because I have a feeling these will be nice inside or out, in the car while traveling, etc. and the more we are able to wash these pet beds the longer they will last. Well, until the fuzzy munchkins decide to destroy them beyond repair. This is pet speak for “I want something new now please”:p It is also been translated to mean “I want you to play with me right now.” And on that note I’m off to give my little guys some attention…

Happy Crafting + Happy Play Time with your cute animals 
Lindsay ;)

Tuesday, April 16, 2013

Panda Print Gift Wrap...

Woot! My Panda Print Gift Wrap is finally here! So now that you have some fabulous Panda Cookies to munch on from my last blog post how about some adorable Panda Prints?! I must admit I am rather excited because I am totally head-over-heels in major like with this Panda Print and once I finished putting the design together I just had to put it to good use some way, some how in the Craftzies shop. 

I decided at that point that the print really needed to be the gift wrap on the top of some gift boxes but the trouble there was that I don’t really offer smaller items such as jewelry in which to use small boxes in my shop. That didn’t seem to matter, all it meant was that I had to make up a few jewelry pieces in which to sell, a craft I usually leave up to others with more patience and smaller fingers, but you know how it is-when the heart wants Panda Boxes the heart wants Panda Boxes. 

(Sigh) All for the love of craft…

I also thought a fortune for the inside might be nice...

So, if you are in the mood for some inspiringly new jewelry + gift wrapped with an adorable new Panda Print feel free to check out Craftzies and see the new items recently listed. Here are a few more pictures of new jewelry in the shop -> 

It turns out it is really rather difficult to get decent photos of jewelry and even after swapping out lenses and different lighting I still had a tough time capturing the dynamic tones these pieces reflect. I will capture some fabulous images as soon as the sun decides to shine. 

In regards to this fabulous panda print, I am also having fabric with this same Panda design printed over @ SpoonFlower so as soon as my test samples come back I will be able to offer items made with this panda print as well. Don’t worry, I will keep you posted.

So, there you have it! A new collection of jewelry with new exclusive gift wrap for the boxes in the cutest of panda prints...

Plus some new Happy Panda Kindle/ Nook Pouches were just listed along with a new pouch designed slightly smaller for a camera or other small device (this one measures in at 9" in length x 6" in width with a 5.5" width zipper for closure and a pocket on the back.

Here is a link that shows  the kindle/ nook pouches (since my older photos seem to be alluding me at the moment) -> http://craftzies.blogspot.com/2012/08/happy-pandas.html

and here is a photo of a new Happy Panda Camera Pouch ->

And then if you aren't sick of pandas yet (& I know you aren't ;) I even shared the most delicious panda cookie recipe this morning (see the last blog post below) to help you out while you await the arrival of your new items. Now all you have to do is go shopping over @ www.Craftzies.etsy.com for something new and then head to the grocery store for those cookie ingredients. Trust me, cookies make the day better. It doesn’t matter what the details are. This is a fact and you can’t argue with facts. Not mine anyway ;)


Panda Remix

It seems to be one of those days where all things in relation to Pandas and Sweets finally come together! As some of you might remember I offered a blog post on how to make your own Happy Panda Tea Cookies (link here -> http://www.craftzies.blogspot.com/2012/06/happy-panda-cookies.html) but since those took nearly forever to make I really wanted a simpler cookie. I mean, how hard is it to make cute Panda Sugar Cookies that don't take hours and hours in which to make? Seriously, this is not rocket science…

Well, I am happy to report that unlike rocket science I have succeeded in making the Perfect Panda Cookie. I had a few really great web pages to help me along and I will link those as well with a few notes on areas I altered slightly based on personal preference but I think these will be perfect for bringing about a bit of cheer to your day and though the recipe I am going to link is not gluten free you can try substituting the flour for a gf mix and it should work. I am trying it now so I will keep you posted on my success there but honestly these are my very favorites so far!

I also found this to be a helpful site when attempting to make my own Happy Panda Cookies -> http://cupecakegang.blogspot.com/2011/11/panda-cookies.html

*I made a few adjustments to the recipe and style of my cookies however and those are mentioned below.
I added green food coloring to the dough because I really liked the look of the panda face with the green background. I rolled it up in wax paper and chilled it overnight. The next day I removed the dough from the fridge and let it warm up a bit while rolling the dough into a more rounded position. The dough had been soft when you placed it in the fridge rolled out into a log so once you remove it from the fridge you do need to roll it around a bit to make the shape more rounded. Then while still wrapped up in the wax paper I took a sharp knife and cut slices (and removed any wax paper pieces as needed-we don’t want to cook those) and put them on a buttered cookie sheet and cooked them on 350 for about 10-12 minutes. As soon as the bottom edges start to darken slightly remove them from the oven and if more time is needed, allow them to cool slightly before taking them off the cookie sheet. If they look perfectly done then remove them from the cookie sheet onto a cooking rack or other flat surface in order to cool.

I also added chocolate to the bottoms and edges of the cookies so allow them to cool fully and then melt the chocolate chips, stir the chips and make sure they are fully melted, and then dunk the cookie bottoms in the chocolate and lay each one out on wax paper. If you have decided not to color your cookies with green colorant then you can skip the cookie chocolate dunk part but when coloring the cookies green I found the cookie looked nicer in appearance (and taste obviously) with the chocolate around the edges. Once you have added the chocolate allow the cookies to cool a bit.

*I was out of almond extract so I substituted it with Vanilla extract and I never use corn syrup in my food so I substituted with a dash of vanilla and milk for the frosting. I found 3.5 cups of sifted powdered sugar, vanilla and 3 tbs. of softened butter were the perfect start and then I added a smidge more milk and stirred, and then just to get it perfect I added a tiny smidge more powdered sugar. Do that and test the consistency on a test cookie and you’ll get it perfect ;)

Once you are finished adding the chocolate to the cookies then we are going to add the Panda Faces. Grab a cookie to test your design, and when making up your white frosting make sure it is thin like an icing rather than a frosting but do make sure that frosting is not too runny. You will know if the icing is too runny, in which case add the smallest amount of powdered sugar while stirring until it is perfect. The perfect consistency is when you can add a small spoonful to the middle and then carefully move the spoon in a circular motion to level the frosting. It should make a nice round circle without running over the edges and yet also be thick enough to cover up the green cookie color below and dry smoothly. Don’t worry, you will find the perfect balance. I ended up with two test cookies in the end but I did find the right consistency for the frosting and the face design.

For the black parts I went with a black food colorant I picked up in the baking section of Michaels craft store and when I made up some of the white frosting I just added a little to a small dish and mixed in some black until I got the right color I wanted. If you cannot find or don’t want to use black food coloring you can probably use melted chocolate though I admit I have not yet tried it myself. One thing I did realize, and honestly didn’t care because of the yummy factor, was that the chocolate on the bottom of the cookies was a brown milk chocolate and the face pieces were a black. If you want the dark areas to match then I would say either add melted chocolate to the face to match or go with dark chocolate for the bottom of the cookies so the colors are all similar. I added the smaller face areas with a bamboo skewer, the ears and eyes with the flat bottom and the nose and mouth with the pointy end of the skewer.  Once finished with the faces I put the plates in the fridge to chill for about an hour.

nom nom nom…

Have a fabulous day & Happy Baking!
Lindsay ;)