For my Game of Thrones junkies out there, this just
might be a fun blog post for you. It definitely was for me. This costume has taken
quite some time to put together but I am finally finished and even have a DIY
instruction offered below. A few quick things to consider before you set out
making your own costume is I recommend utilizing what you have at your disposal
in the way of materials before you hit the craft shop. I know you will be
creative but never the less I wanted to mention it because in the end you will
find a lot of materials are needed in order to create this costume so use what
you’ve got to start. Keep in mind also that this is most certainly a wild
dothraki costume so a bit of ragged wildness is expected. Other than the boots,
which I am not making, here are the images I was working off of ->
The interesting thing about these images is the tops
are different, the first being more of a grey and the second brown. It does look like
the twine braid that runs across the top into neck ties at the back is similar
if not identical on both. The second image has done away with the hanging woven
piece in front, the two belts and the hand wraps but the rest is the same. Once
I obsessed over these images I decided that these are the pieces I wanted to
include in the costume ->
Costume pieces: woven top + woven front piece / pants/ skirt/
waistband/ 2 belts/ brooch/ hand wraps
That is pretty much everything but the boots. Below are
the materials I needed for the entire project, and below the materials list you
will find I have broken down the construction notes for each of the pieces
individually. I am also including in parenthesis at the end of each instruction
segment the materials needed for each costume piece.
Materials
Needed:
Sewing machine, scissors, brown thread for the pants and a light colored thread
for the waistband (however if you are only hoping to purchase one color thread
go with a brown as the only part where it would really matter is the side seams
on the natural colored waistband and those are turned in so it hardly matters),
Brown fabric for pants, brown fabric for skirt pieces, cream/ natural for the
waistband, gold paint, marker, glue, hole punch, outer woven fabric for the top,
lining fabric for the top -especially if going with a burlap fabric (burlap is
super itchy on your skin-you don’t want to be all red and itchy at your event
ladies. You can probably use some extra fabric, you really don’t need a lot.
You might also find you can use an old t-shirt or something of that nature for
the lining-it doesn’t matter what it is really, you just want to keep that
burlap from actually touching your skin), polymer clay, baking dish and a small
amount of tin foil, paint brush, brooch backing, strips of a dark, leather like
fabric for the hand wraps (you can use scrap strips of fabric left over from
your skirt for this-see instructions below for details), brown ribbon or thin
long strips of fabric (for lacing up the back of the lower skirt panels + for
lacing up the back of the woven top + for blending in with the woven top and
woven front piece to give them that wild look), elastic for the pants waistline,
belt hardware for both belts-these are going to be D cell metal hardware or
something of that nature (these are optional as you can just tie or sew them
together in back or fasten some type of loop but I used them), sewing pins, metal
snaps and or hook and eyes for closure at the front bodice, 2 medium strips of
a dark leather-type fabric for the hand wraps, plyers and eyelets for lacing up
the back and for attaching the woven front piece) optional-I had them and they
worked well but you can fashion something else to work instead if needed), brown
fabric dye-I went with dark brown dylon, bucket, gloves, and a sewing needle
for the small detail work.
Making the Woven top
+ front woven design:
You are going to want about 1 yard and a half for both this and the front woven
design that hangs in front. Any extra string or yarn fibers at your disposal
will also work well such as my random collection of woven fibers.
You also need a
pattern guide for the piece for the top I imagine. This is what I went with and
then I cut it down slightly as needed based on the khaleesi measurements I am
given. Some tucks and such will be needed to make a nice fit. You are going to want four pieces, two for the
front and two for the back. The back center seams with have eyelet holes and
lacing and the inside front will have hidden snaps to keep it closed. You can
also use hook and eyes in place of or in addition to the snaps as desired. For
the back center seams, for each side, fold over about ½” and sew, trim and fold
over again and sew the seam down once, with about 1/3” between the two seams.
This will help stabilize this area, especially since it is a bit of a ragged weave
we are working with, and you will add eyelets and lace up the back later on.
The eyelets are optional of course however I did use them. If you do not have
access to eyelets and a plyer punch then you can snip little holes and hand sew
around the little circles so as to stabilize the areas for the lacing.
Once you have your base top made measure from the
start of your right side at the top all the way around the bodice and up into
what you imagine are long ties, long enough to use for tying the top up at your
neck. Measure the other side and these will determine how long you need your
wild twine made. Add about 5” to this length to compensate for the braid and
then take those strands into three different sections and either tie off onto
something or tape down and then braid really long ties. Once you have finished
knot the end and then make the other piece. If you need to, put your braided
trim in the dye lot in order to get the desired color. Next align it with the
bodice as shown and hand sew the braid down at the top around the bodice on
each side, allowing for the braid trim to go upward so you will be able to tie
the braid at the back neck as shown in the photos. Add the hidden snaps as needed, place the brooch
to the front and your woven khaleesi top is finished! Here is a photo of the
top design with braid attached.
As I was weaving the fabric for my original khaleesi
top I just happened to be making a blouse out of an interesting weave and
realized if dyed brown, it would work rather well as a khaleesi top as well so
I used the scraps and made a second top in similar style to the first. The
pattern and construction of both tops were the same, the only difference was
the grey top was with fabric I made on my weaving loom and the brown one was a
soft ecru colored weave I dyed brown. Sew all pieces together before dying the
materials and construct the braids before dying them as well. While that was
drying I braided and dyed the neck ties and then added those to the top and the
right and left of the laced area at the center back. Add the additional notions
as desired and you are finished.
Materials
needed:
sewing pattern-> cut something like what I have shown in the drawing above, woven fabric,
scissors, lining fabric (if needed), string + twine + yarn (any fibers to weave
into your woven fabric to give it more of a wild look and also for stringing up
your braided hem and neck ties), and possibly a brown dye and a bucket to dye
the woven piece in the end, though I can’t say if this is going to be
necessary.
Materials
needed:
an
estimated 1.5 yards of a brown fabric or the amount called for by the pattern
you have selected. I went with a jersey fabric but the choice is yours. You may
prefer to go with a cotton stretch, or even just decide to go with an old pair
of pants. Slimming down an old pair of khakis and dropping them in a brown dye
lot just might do the trick here but it depends on what you have on hand.
Making the Skirt: *Before you cut the lower skirt panels for
this costume piece see the Making the Belts section below as you will be
cutting three long strips of fabric for the two belts prior to cutting the
skirt pieces here. Save the scraps for your hand wraps-details below.
I call this piece a skirt but they’re probably more
like..dothraki riding chaps more than a skirt. They are however very easy to
make and require very little sewing. You need about 2 yards if you are around a
size 12 or so, possibly more like a yard and a half if you are a smaller
khaleesi. The skirt material I selected was sort of like a suede cloth but it
had a bit of texture to it and the color was a bit more of what I wanted. It
was a tough match when fabric hunting so I think I will be replacing this
fabric for future orders with a suede cloth fabric. There is not much sewing
for this part of the costume, I simply held up the left side of fabric above my
waist and wrapped it around my hips and toward the back. I made a note of where
the center back was and then cut the vertical seam down the back in a ragged,
uneven way and then did the same for the other side. I left them longer as my customer
is a tall Khaleesi but I would say leave them longer and trim them down as
needed once you have the pants and boots on. Best to wait until you have the
pieces together before cutting away areas so you don’t cut too much away.
For the yardage amount needed, measure your waist
and add 4” to one piece and 6” to the other. You will be putting these pieces
together with the left side going under in front and the right side on top with
the fabric torn away and ragged, pulling out a bit so the underside shows a bit
of white. Pin and then sew the front layering of the skirt pieces together. For
the back you will be layering the pieces so that the right side is closest to
your skin and the left side is out (the opposite layout as the front) and then
for the back you can either sew a seam just like you did for the front, or in
my case, since I want my customer to be able to adjust the sizing a bit as
desired, I am adding eyelet lacing in back so she can lace it smaller or
bigger. This area will not be visible as the waistband will fall over the
lacing in back. For the underside of my skirt panels, the fabric that I used
had a white color and I wanted it darker so I colored it with the coffee dye.
It didn’t have to be too dark but I just wanted something a bit darker than a
white or natural so the light discolored look for the underside worked well in
the end.
Materials
needed:
about
1.5 + yards of fabric (but I recommend measuring yourself at the hips in front
around to the backside and adding about 6-8” additional in width to determine
the amount needed). You can then either go with this amount recommended and cut
the skirt pieces shorter or double the amount for the longer skirt version. I
doubled the amount in the costume I made and had enough to cut the fabric strips
for the belts.
Making the
Waistband:
For the natural colored waistband measure your waist and your hips all the way
around. Take the fabric and cut two pieces of fabric for your waistband, one
for the front and one for the back. You will want it so the front piece is slightly
wider than the back but both will make up the hip measurement you took. Once
you have cut those pieces lay them out individually and cut the sides of each
on a slight angle like this ->
Sew the side seams and then add two small ties to
the underside of the waistband at the hips-sew them to the center of the seams-and
then cut two more strips for each side and these will be sewn to the top of the
skirt so when worn, the waistband will tie to the skirt via small hidden ties.
You will find this easy to slip on over the skirt and fold the inside seam
inside. The majority of the waistband will fall outside over the skirt and the
belts will then be added. Once you have the skirt finished and then have placed
the waistband over the skirt you will want to cut the waistband in a ragged
manor as shown in the images. I recommend leaving the inside seam straight
across as we will be using this same waistband in a later costume so for the
inside seam of raw edges fabric, keep it straight across and you won’t need a
new waistband when we move onto new costumes. For the fabric yardage on this,
you really need a rather small amount and I found I had some already in my
fabric stash that was the appropriate size. Definitely check out the remnant
bins at the fabric stores to see if they have a piece large enough in the color
you need for this piece.
Materials
needed:
scissors, thread, sewing machine, natural colored fabric that has the width of
your hip area across in front -measure hip to hip + 4” to determine the width
needed for the front panel and then for the back deduct those 4” and a length
of about 22”-28” in length. Cut those pieces out and sew up the vertical seams.
Turn right side out and this piece should be fine to use, simply touch up with
a pair of scissors as desired but this is a pretty easy piece to make.
Making the Belts +
hand Wraps:
*Before you cut the lower skirt panels cut three long strips of fabric for the
two belts. I cut three fabric strips of fabric (from the skirt fabric before I
cut those pieces) and each was about 1” in width. Two will be for the top belt,
the third will be for the lower belt. For the first belt take one of the strips of
fabric and cut out a design like this one shown and then take glue and glue
this piece on top of the other piece so it looks like in the image above.Then treat it
with a gold wash of paint once dry.
For the second belt take a marker and draw a
boomerang shape down the strip of fabric. Cut the side seams out slightly so it
starts to actually look like small boomerangs (yes, your hands are probably
tired by now. Take a rest, have a cookie). Then once finished cutting out the
edges take your marker again and draw a dark line down the center of the belt
through the boomerang shapes. The boomerang belt will also be treated with the
gold paint but instead of a gold paint wash as done with the other belt, I went
with a very light golden glaze and then touched up the inside of the boomerang shapes
with gold paint-a small brush or the corner of your larger brush or even a
q-tip in a pinch should work for this part. In the end since we are sort of
faking the design of the second belt, my intent here is to have the black
marker still show up a bit through the touches of blotched gold paint. For the
paint used I went with the gold metallic Dorado Martha Stewart craft paint. I
used a permanent marker and it smelled like soy sauce on the belt afterwards.
This should go away once treated with the gold paint, mine did. If you decide
on the hardware pieces for the one end you will find sewing the end up on a
machine or hand sewing the tiny area will be necessary.
For the hand wraps, use the scraps you have left
over from the skirt fabric and make yourself 2 medium sized strips of fabric
that are about ½” wide and simply wrap around your hands, tucking the ends in
as you would a bandage. If you need to darken your hand wraps then using some
extra dark dye from the mix you made up and paint them, and if you want a
little bit of a sheen to the pieces you can spray them with a bit of a clear
spray, rough them up a little bit more and then they should look perfectly worn
and ready for wearing!
Materials
needed:
three
long strips of fabric, black or dark brown marker, scissors, gold paint, gloves,
paint brush, an area large enough to glue, dry and paint your belt pieces, D
cell or other metal hardware for the belt ends so as to adjust-this is again
optional and keep in mind you might find you have the hardware you can cut off
of an old bag or fasten one from fabric scraps and such. I know you can be
crafty. You will also want some extra scraps from the skirt fabric to use for
the hand wraps so save those scraps until you are completely finished.
Making the Brooch:
Making the Brooch was an interesting experience and I don’t usually work with
polymer clay but I didn’t know how else to do this so I picked up one of those
small clay packets while at the craft store and it was about $1.25 or so in
price. It offers a small amount of clay but I didn’t need much. You are going
to need a pan to make the clay pieces and you definitely want to lay down tin
foil before putting the pieces in the pan because the clay will stick to the
pan and there you will be at 2 am trying to pop baked clay out of your pie tin.
On the up side I now have a new pan to craft with :p
You will also want brooch backings and I made myself this image guide for my brooch design, you might find this a helpful guide as well. I made 2 that were too big so then the guide was made and the third turned out the best and most accurate. So roll out your round circle to scale and then mush the top ever so slightly so it falls a little more flat around the top. Place the tin foil in the pan, heat your oven and follow the directions that come with your clay.
You will also want brooch backings and I made myself this image guide for my brooch design, you might find this a helpful guide as well. I made 2 that were too big so then the guide was made and the third turned out the best and most accurate. So roll out your round circle to scale and then mush the top ever so slightly so it falls a little more flat around the top. Place the tin foil in the pan, heat your oven and follow the directions that come with your clay.
Once finished remove from the heat and let them cool
completely. Glue the pieces carefully to the round circle, propping them up so
they stay in the right place while drying (styrafoam or tin foil work well for
this) and then glue the brooch facet to the back. Let the glue dry and then
either paint or spray the brooch with gold-make sure you cover the facet
opening with tin foil before painting so you don’t accidentally seal it shut with
the paint, and then try it on your top. If you find it work well except that
the lower left side needs some support then remove the brooch, turn it over and
glue a small hook to the back of the lower half of the brooch. Let it dry and
then when you place the brooch onto the top once more, hook a bit of the woven
material into the fabric and that will help hold that lower area of the brooch down.
*Don’t forget to place your brooch on a sheet of tin foil before painting or
spray painting, you don’t want it to stick to a board after all of that work!
Materials
needed:
polymer
clay, brooch backing, gloves, glue, gold paint, paint brush, tin + tin foil + oven
to bake the clay pieces. *little tin foil or styrafoam pieces to hold the
brooch pieces up while drying.
That’s about it really. You might be tired but you
do have a khaleesi costume and it was a lot less tiring than wandering lost in
the desert. The sweat, dust and blood are all you so feel free to deck your
costume out once finished. My only suggestion would be to only get the lower
half of your waistband dirty because we are going to make another khaleesi
costume at some point and you just might want to reuse that waistband, in which
case we will be flipping it around so the straight inside seam will be on the
outside. That costume has a much cleaner appearance so we don’t want dirt on
it. The choice is yours but you will find as we progress that a lot of these
costume pieces show up again in a different way in which case saving the pieces
will be very helpful for future costumes.
Happy crafting and if you have any questions or
suggestions feel free to chat!
Lindsay ;)